食品用瓦楞紙箱抗壓強度檢測方法的探討

打開文本圖片集

摘 要：本文討論使用抗壓試驗儀對食品用瓦楞紙箱抗壓強度的檢測方法。通過利用壓板對瓦楞紙箱施加壓力直至得到“力值-變形量曲線”，如果紙箱的變形量過度，則紙箱不能使用。選擇可接受變形量范圍內的最大力值為抗壓強度值，便于食品企業對瓦楞紙箱進行入庫驗收和質量控制。

關鍵詞：瓦楞紙箱;抗壓強度;檢測方法

Discussion on Testing Method of Compressive Strength of Corrugated Cartons for Food

CHEN Chunyu， HE Ying， YANG Aijun， LIN Xiachun， HUANG Junguang， CHEN Xiaodong

（Guangdong Yantang Dairy Co.， Ltd.， Guangzhou 510507， China）

Abstract： The paper discusses a test method for the compressive strength of food corrugated cartons by using a compressive tester. Apply pressure to the corrugated box by using the pressing plate until the “force value deformation curve” is obtained. If the carton is tested excessive deformation， it can not be used. When the compressive strength of the carton is within the acceptable deformation range， it is beneficial for the food enterprise to carry out the acceptance and quality control of the corrugated carton.

Keywords： corrugated carton; compressive strength; testing method

我國瓦楞紙箱工業經過多年的發展，已形成相當規模，市場對各類商品運輸包裝用的瓦楞紙箱需求增長迅速[1]。（剩余3979字）