機油壓力報警燈常亮故障排查及解決

打開文本圖片集

摘 要：在汽車使用過程中，機油壓力報警燈點亮說明發動機油路中的機油壓力低于潤滑系統要求的下限值，發動機潤滑系統出現了問題。本文介紹了發動機機油泵泄壓閥常開導致機油壓力低，點亮機油壓力警報燈問題的排查、分析和驗證過程。為機油壓力報警燈常亮故障排查提供一些參考。

關鍵詞：機油壓力報警燈常亮 機油壓力傳感器 機油泵

Check and solve the engine oil pressure alarm light on fault

Lv Qiju Liang Shuangqing Lin Wei Lin XiHan

Abstract：In the process of automobile use， When the oil pressure alarm light is on， the oil pressure in the engine oil line is lower than the lower limit required by the lubrication system， and there is a problem with the engine lubrication system.This paper introduces the investigation， analysis and verification process of the problem of turning on the oil pressure alarm light due to the low oil pressure caused by the normally open pressure relief valve of the engine oil pump.Provide some reference for troubleshooting when oil pressure alarm light is on.

Key words：Oil pressure alarm light on ， Oil pressure switch， Oil Pump

1 引言

發動機機油壓力正常，才能保證將機油輸送到發動機各摩擦件表面，并在摩擦表面形成油膜，實現液體摩擦，從而減小摩擦阻力、降低功率消耗、減輕機件磨損，以達到提高發動機工作可靠性和耐久性的目的。（剩余3488字）