缸體噴油嘴面銑削刀具頻繁出現崩刀斷刀的原因分析和解決思路

打開文本圖片集

摘 要：針對缸體噴油嘴面銑削刀具頻繁崩刀斷刀的問題，結合加工工藝，分析了可能導致該問題發生的多種因素，最終找到毛坯余量、刀具加工路徑、刀具結構設計三個方面的影響因素，并針對這三個影響因素減小加工余量、更改加工路徑、擴大刀具容屑槽等措施，解決了崩刀斷刀問題。

關鍵詞：崩刀 刀具結構設計 容屑槽 毛坯余量 噴油嘴

Cause Analysis and Solution Ideas for Frequent Chipping and Breaking of the Milling Tool on the Face of the Cylinder Block Fuel Injector

Wu Ling

Abstract：Aiming at the problem of frequent chipping and breaking of the milling tool on the face of the cylinder injector， combined with the processing technology， the factors that may lead to the occurrence of the problem are analyzed， and finally three factors including the blank allowance， the tool processing path and the tool structure design are found. In view of the three influencing factors， reducing the machining allowance， changing the machining path， and expanding the tool chip flute and other measures， the problem of chipping and tool breakage has been solved.

Key words：chipping， tool structure design， chip flute， blank allowance， fuel injector

1 引言

增壓發動機活塞的熱負荷很高，主要通過活塞冷卻噴油嘴進行噴油冷卻。（剩余3538字）