基于機載激光雷達點云數據的1∶10000地形圖地貌要素生產方法研究

打開文本圖片集

【摘要】隨著測繪科技水平的發展，機載LiDAR技術得到了廣泛應用。本文利用機載LiDAR點云數據對1∶10000地形圖地貌要素的生產方法進行研究，對研究區開展生產試驗和精度檢測。結果表明，產品精度滿足1∶10000地形圖地貌要素的生產要求，達到了相關高程精度的要求。

【關鍵詞】機載LiDAR；點云數據；地貌要素

【DOI編碼】10.3969/j.issn.1674-4977.2024.04.039

Research on Production Methods of Geomorphic Elements in 1∶10000 Topographic Maps Based on Point Cloud Data of Airborne LiDAR

CHEN Changwei

（Liaoning Inspection， Examination and Certification Centre， Shenyang 110036， China）

Abstract：With the development of surveying and mapping technology， airborne LiDAR technology has been widely applied. This article uses point cloud data of airborne LiDAR to study the production methods of geomorphic elements in 1∶10000 topographic maps. Through production experiments and accuracy testing in the research area， the results show that the product accuracy meets the production requirements of geomorphic elements in 1∶10000 topographic maps and meets the relevant elevation accuracy requirements.

Keywords：airborne LiDAR； point cloud data； geomorphic elements

0引言

隨著測繪科學技術和儀器裝備水平的發展，激光雷達（Light Detection and Ranging，LiDAR）技術得到了廣泛應用。（剩余3001字）