金合金導電環刷絲結構與轉速對配對副材料摩擦性能的影響

打開文本圖片集

摘  要：導電滑環是實現兩個相對旋轉機構之間電流、信號傳輸?shù)难b置。本實驗探究刷絲結構與轉速對配對副材料的摩擦性能影響。結果表明：常溫常壓下，配對副的接觸面積越大，摩擦系數越大，接觸電阻越小;反之，摩擦系數越小，接觸電阻越大;單絲結構配對副材料的摩擦系數最小且穩定。

關鍵詞：導電滑環;刷絲結構;轉速;摩擦系數;接觸電阻

中圖分類號：TM934.14     文獻標志碼：A          文章編號：2095-2945（2022）01-0054-03

Abstract： The conductive slip ring is a device that realizes the transmission of current and signal between two relative rotating mechanisms. In this experiment， the effects of brush wire structure and rotational speed on the friction properties of pair materials were investigated. The results show that under normal temperature and pressure， the larger the contact area of the pair is， the larger the friction coefficient is and the smaller the contact resistance is; on the contrary， the smaller the friction coefficient is， the greater the contact resistance is; in this case， the friction coefficient of monofilament structure is the smallest and stable.

Keywords： conductive slip ring; brush wire structure; rotational speed; friction coefficient; contact resistance

導電環是兩個相對旋轉設備之間用來傳遞電流、信號的關鍵零部件，主要是依靠電刷架和滑環組成的配對副之間進行滑動接觸，進而在兩個旋轉體之間傳遞電流和信號[1-2]，是整個設備中最容易失效的單體零部件之一。（剩余3126字）