機械天平測量結果的不確定度評定與表示

打開文本圖片集

【摘要】本文依據新的JJG 98—2019《機械天平》檢定規程，選取實驗室中穩定的機械天平為測量對象，建立機械天平測量模型，對影響機械天平不確定度的來源進行計算分析，最后合并得出該稱量點測量結果的不確定度。

【關鍵詞】機械天平；測量設備；不確定度

【DOI編碼】10.3969/j.issn.1674-4977.2024.01.076

Evaluation and Expression of Uncertainty of Measurement Result of Mechanical Balance

MENG Lingshuai， GAO Yan， WANG Xiaoxiao， LIU Decheng， ZHANG Yunlong

（Weifang Institute of Metrology and Measurement，Weifang 261061，China）

Abstract： According to the new verification regulation JJG 98—2019 Mechanical Balance， the stable mechanical balance of the laboratory is selected as the measurement object， the measurement model of mechanical balance is established， the source of the uncertainty of the mechanical balance is calculated and analyzed， and the uncertainty of the measurement result of the weighing point is finally obtained.

Keywords： mechanical balance； measuring equipment； uncertainty

目前，機械天平仍然作為計量技術機構和企業的計量標準器具被使用，特別是在一些安全程度要求較高、需要精密稱量的生產加工領域。（剩余1818字）