天平砝碼檢定誤差原因分析及改進措施

【摘要】天平砝碼是常用的計量標準裝置之一，用于檢定和校準各類稱重設備。在天平砝碼檢定過程中，經常會出現誤差，影響著測量結果的準確性和可靠性。本文深入分析了天平砝碼檢定誤差產生的原因，并提出相應的改進措施，以期有效改善天平砝碼的檢定精度。

【關鍵詞】計量檢定；天平砝碼；誤差

【DOI編碼】10.3969/j.issn.1674-4977.2024.01.063

Analysis and Improvement Measures for the Errors in the Calibration of Balance Weights

YAO Jixiong

（Loudi Metrological Testing and Verification Institute， Loudi 417000， China）

Abstract： The balance weight is one of the commonly used metrological standard devices for verifying and calibrating various weighing equipment. However， errors often occur during the calibration process of balance weights， which affects the accuracy and reliability of measurement results. This article deeply analyzes the reasons for the calibration errors of balance weights and proposes corresponding measures to effectively improve the calibration accuracy.

Keywords： metrological verification； balance weight； error

在科學實驗、工業生產以及商品交易等領域，準確的測量結果是保證產品質量、判斷實驗結論和維護公平交易的基礎。（剩余4494字）