10 kV帶電環境下線纜自適應剝皮器的設計與關鍵部件仿真

打開文本圖片集

摘 要：帶電環境下線纜剝皮是配網帶電最主要的作業之一。設計一種適用于10 kV帶電環境下線纜自適應剝皮裝置，介紹該裝置的結構與工作原理，對其關鍵部件進行有限元分析，驗證其設計合理性并進行拓撲優化，提升強度，減輕質量。研究結果表明：所設計的自動剝皮器靈活、高效，極大地提高了線纜的剝皮可靠性及效率。

關鍵詞：帶電線纜剝皮；自適應剝皮器；有限元分析；拓撲

中圖分類號：TM726  文獻標志碼：B  文章編號：1671-5276（2024）01-0169-06

Design and Simulation of Cable Adaptive Strippers in 10 kV Live Environment

TAN Haiming1， WANG Hailin2， QIN Mingsheng1， WEI Qiuzhen1， LI Chengxin2， WEI Wei1， TAN Yongzhen1

（1. Hechi Power Supply Bureau， Guangxi Power Grid Co.， Ltd.， Hechi 547000， China;

2. Hechi Huanjiang Power Supply Bureau， Guangxi Power Grid Co.， Ltd.， Huanjiang 547100， China）

Abstract：Stripping cables in a live environment is one of the most important tasks in a live distribution network. Designes an adaptive peeling device suitable for offline 10 kV live environment. Its structure and working principle are introduced， the finite element analysis of its key components is carried out， the rationality of its design is verified， and topology optimization is conducted for strength reinforcement and mass reduction. The research results show that the designed qautomatic stripper designed is flexible and efficient， which greatly improves the stripping reliability and stripping efficiency of cables.

Keywords：striping of live cables; adaptive peeler; finite element analysis; topology

0 引言

隨著社會不斷的發展進步，配網建設的規模也在不斷擴大，配網運維檢修工作量也隨之增加。（剩余5527字）