飽和潛水支持船呼吸氣管清潔度控制

打開文本圖片集

摘    要：本文根據我司完成的多艘飽和潛水支持船建造以及海工船加裝飽和潛水系統的經驗總結，系統論述了呼吸氣管從備料預制到船上施工全過程中清潔度的控制要點，并根據呼吸氣管清潔度的技術要求，提出了管路清洗的工藝流程及和檢驗方案，為其他同類工程提供借鑒。

關鍵詞：飽和潛水；呼吸氣管；清潔度；清洗工藝

中圖分類號：U671.91                               文獻標識碼：A

Cleanliness Control of Breathing Pipe Line for Saturation Diving Support Vessel

ZHUANG Xuesheng，  LONG Ben

（ Yiu-lian Dockyards （Shekou） Limited，  Shenzhen 518054 ）

Abstract： According to the experience summary of the saturation diving system equipped and completed for some saturation diving support ships and marine engineering ships built in Yiu-lian Dockyards， this paper systematically elaborates the control points of breathing pipe line cleanliness during the whole process from material preparation & prefabrication to fabrication aboard the ship， and technical requirements of cleanness of breathing pipe line after installation， and puts forward the cleaning procedure of pipeline and inspecting procedure. It can provide experience reference for the similar projects of other shipyards.

Key words： saturation diving; breathing pipe line; cleanliness; cleaning procedure

1     前言

飽和潛水是一種在大水深條件下，開展長時間作業的潛水方式， 被廣泛應用于50～300 m水深范圍內海底管線與電纜的鋪設、檢測與維修、海管除蠟、海管懸跨段治理、安裝立管、膨脹彎、電纜護管、FPSO單點系泊系統等常規海洋工程中。（剩余4548字）