船舶尾軸中間軸承的巴氏合金修復方法

打開文本圖片集

摘    要：在船舶建造過程中，巴氏合金廣泛應用于船舶上的各類軸瓦。在船舶修理時，為了提高巴氏合金軸瓦的重復使用率，減少委外重新鑄造的資金和時間，根據三十多年來修復巴氏合金軸瓦的實踐經驗，總結出一套合格率高的巴氏合金的焊補修復技術。

關鍵詞：巴氏合金;軸瓦;修復

中圖分類號：U664.21                               文獻標識碼：A

Babbitt Metal Repair Method of Intermediate

Bearing of Ship Stern Shaft

HUANG Jianwei

（ Guangzhou Wenchong Ship Repairing Co.， Ltd.， Guangzhou 511462 ）

Abstract： ln the process of ship building， the babbitt metal is widely used in all kinds of pillows on ships. In ship repair， in order to improve the repeated utilization rate of babbitt metal pillow and reduce the capital and time of outsourcing recasting， according to the practical experience of repairing babbitt metal pillow in the past more than 30 years， a set of welding repair technology of babbitt metal with high qualified rate is summarized.

Key words： Babbitt metal; Pillow; Welding repair

1     前言

船舶中許多轉動設備都是依靠各種軸承的支撐及潤滑油對軸承進行潤滑來工作的。（剩余4166字）