淺談商用車換電技術方案
打開文本圖片集
【摘 要】本文針對商用車換電技術進行闡述,主要內容包括換電框體總成零部件介紹、換電流程、鎖止機構工作原理和換電技術方案,為讀者對后續換電系統部件開發及驗證給予一定的指導意義。
【關鍵詞】商用車;換電技術;鎖止機構
中圖分類號:U463.6 文獻標志碼:A 文章編號:1003-8639( 2023 )09-0029-02
Discussion on the Technical Scheme of Commercial Vehicle Power Exchange
WANG Chuanyi,ZHANG Shunyi
(XCMG Automative Division,Xuzhou 221100,China)
【Abstract】This paper describes the power exchange technology of commercial vehicles,including the introduction of the power exchange frame assembly parts,the power exchange process,the working principle of the locking mechanism and the power exchange technical scheme,so that readers can give some guidance to the subsequent development and verification of the power exchange system components.
【Key words】commercial vehicle;power exchange technology;locking mechanism
作者簡介
王傳義(1996—),男,電氣工程師,研究方向為整車動力電池方案匹配和電器部件開發;張順義(1986—),男,工程師,研究方向為整車動力電池方案匹配和電器部件開發(通訊作者)。(剩余2259字)