卡車制造端的CAN總線故障分析與排除(1)

打開文本圖片集

【摘  要】隨著卡車電氣化趨勢發展的深入，各類電控系統也隨之增多，而CAN總線作為控制器之間通信的橋梁，其作用日益顯現。卡車制造階段因生產操作、制件品質等因素會造成一系列的CAN總線方面的電氣故障，通常這類故障相對于其他硬線故障更加復雜，值得分析和學習。

【關鍵詞】CAN總線；電氣故障；分析方法

中圖分類號：U463.62    文獻標志碼：B    文章編號：1003-8639（ 2023 ）04-0083-03

【Abstract】With the development of truck electrification trend，all kinds of electronic control systems are also increasing. As a communication bridge between controllers，CAN-bus plays an increasingly important role. In the truck manufacturing stage，a series of CAN-bus faults will be caused by production operation，part quality and other factors. Compared with other hard-wire faults，such faults are usually more complex and worthy of analysis and learning.

【Key words】CAN-bus； electrical fault； analytical method

1  前言

CAN總線方面的電氣故障現象雖復雜多樣，但也存在較強的規律性，本文只選取卡車制造端部分常見的CAN總線故障案例加以探討，同時為精簡內容、縮短篇幅，文中多幅插圖將被復用。（剩余4801字）