3號燃煤鍋爐排煙溫度偏高原因分析及調整措施

打開文本圖片集

摘  要：某電廠3號鍋爐排煙溫度偏高，且實際值與設計值偏差較大。為解決這些安全隱患，某電廠通過性能試驗發現影響排煙溫度的因素較多。收集現階段的運行參數與設計值進行比較，再綜合分析并提出改進措施，保證機組安全、經濟運行。

關鍵詞：排煙溫度;原因分析;調整措施

中圖分類號：TM621.2      文獻標志碼：A          文章編號：2095-2945（2022）12-0146-05

Abstract： The exhaust gas temperature of No. 3 boiler in a power plant is high， and the actual value deviates greatly from the design value. In order to solve these potential safety hazards， a power plant found that there are many factors affecting the exhaust gas temperature through performance test. We collect the operation parameters at this stage and compare them with the design values， then comprehensively analyze and put forward improvement measures to ensure the safe and economic operation of the unit.

Keywords： exhaust temperature; cause analysis; adjustment measures

為了降低發電煤耗和節能減排，電廠運行人員會在合理范圍內提高初參數。（剩余3451字）