帶式輸送機滾筒加工質量控制

[摘    要]文章結合實際，對帶式輸送機滾筒加工質量控制要點進行研究。首先闡述滾筒加工質量給帶式輸送機產生的影響因素，其次對滾筒加工工藝以及質量控制要點進行全面探討，希望通過分析能夠給相關領域的工作人員提供一些參考。

[關鍵詞]帶式輸送機;滾筒加工;跑偏原因;質量控制

[中圖分類號]TH222 [文獻標志碼]A [文章編號]2095–6487（2022）08–0–04

Quality Control of Drum Processing of Belt Conveyor

Hu Nai-chuan

[Abstract]Combined with practice， this paper studies the key points of machining quality control of belt conveyor drum. Firstly， this paper expounds the influencing factors of the drum processing quality to the belt conveyor， and then comprehensively discusses the drum processing technology and the key points of quality control， hoping to provide some references to the staff in relevant fields after analysis.

[Keywords]belt conveyor; Drum processing; Reasons for deviation; Quality Control

1 滾筒加工質量對帶式輸送機的影響

1.1 皮帶跑偏原因

1.1.1 滾筒位置膠帶跑偏

輸送機內滾筒圓柱度精度不合格造成膠帶在臨近輸送機滾筒部位上因?yàn)閺埩Υ嬖诘牟煌詫?dǎo)致膠帶會向著直徑相對較大的一側偏離運行;驅動滾筒的精確度比較差，滾筒和輸送帶中心線是不垂直的，會直接偏向張力較大的一側;驅動滾筒中的軸承、傳動軸等部件出現了故障問題，出現偏斜的情況，使得膠帶發生偏離運行。（剩余5122字）