有限元連接方法在某無人飛行器建模中的應用

打開文本圖片集

摘 要：針對復雜飛行器在有限元建模中將不同結構連接的問題，對慣性釋放計算方法進行驗證；基于某無人飛行器的整機結構平臺，分別采取1d單元、接觸和共節點3種有限元連接方法實現對不同結構連接，比較每種方法的建模和計算效率以及計算結果。驗證表明：在滿足工程的要求下，1d單元連接方式效率最高。

關鍵詞：有限元；連接方式；建模；慣性釋放；飛行器

中圖分類號：V279 文獻標志碼：B 文章編號：1671-5276（2024）04-0187-06

Application of Finite Element Connection Method of Unmanned Aerial Vehicle

LI Xin， WANG Kun， HU Qi， FENG Zhengjian， ZHANG Shanzhi

（Aerospace Times Feihong Technology Company Limited， Beijing 100094， China）

Abstract：The calculation method of inertial relief is verified to address the connecting different structures in finite element modeling of complex aircraft. Based on the complete structure platform of an unmanned aerial vehicle， three finite element connections methods of 1d element， contact and common node are adopted to connect different structures. The modeling and calculation efficiency of each method are compared， and the calculation results are verified by experiments， which conclude that the 1d element connection method is the most efficient connection method in line with the requirements of engineering.

Keywords：finite element; connection type; modelling; inertial relief; aerial vehicle

0 引言

在航空航天領域中，有限元法已成為大型飛行器結構強度的有效研究方法。（剩余6011字）