印染廢水處理工藝設計與分析

打開文本圖片集

摘要：以某工業園區污水處理廠為例，對印染廢水的水質和水量特點進行分析，提出解決方案，并進一步進行工藝設計。經實際運行后發現，該污水處理廠出水水質可以穩定達標，取得良好的經濟效益。

關鍵詞：印染廢水；污水處理廠；設計參數；經濟效益

中圖分類號：X791 文獻標識碼：A 文章編號：1008-9500（2024）08-0-03

DOI：10.3969/j.issn.1008-9500.2024.08.073

Design and Analysis of Printing and Dyeing Wastewater Treatment Process

HOU Wei1， WANG Jinye2， SUN Zhongshu3

（1. Liaocheng Ecological and Environmental Protection Comprehensive Law Enforcement Detachment;

2. Comprehensive Laboratory of Shandong Liaocheng Ecological Environment Monitoring Center;

3. Shandong Qiuzhuo Environmental Protection Technology Co.， Ltd.， Liaocheng 252000， China）

Abstract： Taking a sewage treatment plant in an industrial park as an example， this paper analyzes the key and difficult points of the water quality and quantity characteristics of printing and dyeing wastewater， proposes solutions， and further designs the process. After actual operation， it was found that the effluent quality of the sewage treatment plant can stably meet the standard. It was found that the sewage treatment plant can achieve good economic benefits.

Keywords： printing and dyeing wastewater; sewage treatment plant; design parameter; economic benefit

印染是指對紡織材料進行物理或化學處理過程的總稱，印染過程中包括產生前處理廢水、染色廢水、脫水廢水以及印花廢水等多種污廢水，因其水質不一且水量常處于波動狀態，難以處理。（剩余2822字）