JQJ180型架橋機架設210 m小半徑曲線橋25 m預制T梁施工技術

打開文本圖片集

摘  要：結合某高速公路增設北互通工程210 m小半徑曲線橋25 m長預制T梁架設實踐，對雙導梁在小半徑橋梁中采用撥軌道、搭設臨時支墩2種方法完成前移轉向的比較，分析雙導梁架橋機在大跨徑小半徑曲線橋架設的可行性。重點介紹架橋機拼裝、架橋機前移、喂梁、T梁安裝和架橋機過孔轉向等施工工藝。

關鍵詞：橋梁工程；架橋機；小半徑；曲線橋；T梁；架設；施工技術

中圖分類號：U445.4      文獻標志碼：A          文章編號：2095-2945（2024）10-0185-04

Abstract： Based on the practice of erecting 25-meter-long precast T-beams of a 210-meter small radius curved bridge in an expressway， this paper compares the two methods of track shifting and temporary pier erection of double-guide beams in small-radius bridges， and analyzes the feasibility of erecting double-guide beam bridge erection machines in long-span and small-radius curved bridges. This paper mainly introduces the construction technology of bridge erecting machine， such as assembling， forward moving， beam feeding， T beam installation， through-hole steering of bridge erecting machine， etc.

Keywords： bridge engineering; bridge erection machine; small radius; curved bridge; T beam; erection; construction technology

目前我國路網建設高速發展縱橫交錯，產生了眾多的互通區、立交橋梁和匝道橋。（剩余5956字）