窄間隙焊接工藝研究及在缸筒上的應用

打開文本圖片集

摘要：主要介紹窄間隙MAG焊接系統在解決厚壁管件窄坡口焊接難題上的突破，它不僅可以將坡口寬度控制在12mm以內，節省焊接材料，控制焊接質量，還可以優化焊縫晶粒組織，使焊縫金屬的強度得到改善，焊縫成形美觀，提高焊縫品質。

關鍵詞：窄間隙；MAG自動焊接工藝；焊接質量

Research on narrow gap welding process and its application on cylinder barrel

WANG Xiangting1， WANG Yongkang2

1. Anhui Huaihai Industrial Development Group Co.， Ltd.， Huaibei 235000， Anhui， China

2.Anhui Mining Electromechanical Equipment Co.， Ltd.， Huaibei 235037， Anhui， China

Abstract： This article mainly introduces the breakthrough of narrow gap MAG welding system in solving the problem of groove welding of thick walled pipe fittings， It can control the groove width within 12mm， save welding materials， and control welding quality. At the same time， it can optimize the grain structure of the weld seam， improve the strength of the weld metal make the seam beautiful， and improve the quality of the quality of the weld seam.

Keywords： narrow gap; MAG automatic welding process; welding quality

1 序言

近幾年，隨著國內液壓支架生產規模的不斷擴大，立柱作為液壓支架主要組成部件，其焊接工藝及生產設備也亟需優化和提升。（剩余5521字）