內圓磨床工作臺鑄件結構與工藝優化

打開文本圖片集

摘要：介紹了工作臺鑄件原工藝方案，并指出該方案在生產中出現的問題。經分析認為， 改進鑄件結構是解決問題的最佳途徑。在不改變外形機械加工尺寸的前提下，改進鑄件結構，調整工藝方案，使諸多問題得以解決，生產出合格的工作臺鑄件，從而達到降低生產難度、節約金屬材料、降低生產成本，以及提高成品率的效果。

關鍵詞：工作臺；模板造型；粘砂；共晶度；成品率

Optimization of the structure and technology of the worktable of internal grinder

CUI Xiwen

Henan University of Technology Engineering Training Centre， Zhengzhou 450001， Henan， China

Abstract： The original process scheme of worktable casting was introduced， and the problems in production were pointed out. It is considered that the best way to solve the problem is to improve the casting structure. On the premise of not changing the external machining dimension， improve the casting structure， adjust the process plan， so that many problems can be solved， produce qualified table casting. Thus the production difficulty is reduced， the metal material is saved， the production cost is reduced， and the finished product rate is increased.

Keywords： table; template modeling; clay sand; eutectic degree; inished product rate

1 序言

工作臺作為M2210型半自動內圓磨床的關鍵部件，對鑄件的內在質量、尺寸精度、整體強度及剛度等都有較高的要求，尤其是2條導軌，為保證其耐磨性，還要求具有較高的硬度（＞190HBW），不允許有任何鑄造缺陷。（剩余4765字）