國外某鉛鋅礦全尾砂膏體充填設計方案研究

打開文本圖片集

〔摘 要〕對全尾砂膏體充填的特點進行了分析，并且以境外某鉛鋅礦為例，對該礦全尾砂材料進行了物理化學性質、粒級組成、強度配比等試驗。根據試驗結果，對深錐濃密充填工藝和圓盤過濾機充填工藝兩種方案進行了工藝比選，最終選擇采用深錐濃密機充填制備工藝，并詳細介紹了充填制備站主要設備的選型計算過程。

〔關鍵詞〕全尾砂膏體充填;濃密機;充填站；設備選型

中圖分類號：TD853      文獻標志碼：B  文章編號：1004-4345（2024）01-000１-05

Research on the Design Alternatives of Unclassified Tailings Paste Fill for a Foreign Lead Zinc Mine

XIONG Gen， LIU Tiejun， XU Gaofeng， QU Fangyu

（China Nerin Engineering Co.， Ltd.， Nanchang， Jiangxi 330038， China）

Abstract  The paper analyzes the characteristics of unclassified tailings paste fill. Taking an overseas lead zinc mine as an example， the tests were conducted on the physical and chemical properties， particle size composition， and strength ratio of the unclassified tailings. Based on the test results， two alternatives are proposed： deep cone thickener fill process and disc filter fill process. After process comparison， the deep cone thickener fill preparation process was selected， and the selection and calculation of the main equipment of the fill preparation station were described in detail.

Keywords  unclassified tailings paste fill; thickener; filling station; equipment selection

礦山充填技術主要分為全尾砂充填、分級尾砂充填、塊石砂漿膠結充填、碎石水泥漿膠結充填和膏體泵送充填等類型[1]。（剩余5305字）