大型磨機監造實踐

打開文本圖片集

〔摘 要〕以西部某大型有色礦山總承包項目大型磨機監造為例，分別從前期策劃和監造實施兩個階段詳述了監造過程的實踐要點。針對磨機制造精度要求高、部件噸位大等特點，分析了大型磨機監造工作的難點，并對磨機關鍵部件及工序的檢驗要點及驗收標準進行了詳細分析，總結了大規格磨機在制造階段的監造工作經驗和心得。

〔關鍵詞〕設備監造；大型磨機；質量控制

中圖分類號：TD453；F626.112   文獻標志碼：A 文章編號：1004-4345（2023）05-0047-04

Practice of Manufacturing Supervision for Large Mill

TIAN Juntao

（China Nerin Engineering Co.， Ltd.， Nanchang， Jiangxi 330038， China）

Abstract  Taking the large-scale mill manufacturing supervision of a large-scale non-ferrous mine general contract project in the western region as an example， this paper elaborated on the practical key points of the manufacturing supervision from two stages： early planning and supervision implementation. In view of high  manufacturing accuracy requirement and large component tonnage of mills， the difficulties in the supervision of large mill were analyzed， and the inspection points and acceptance standards for key components and procedures of mills were analyzed in detail. In addition， the paper summarized the experience and insights of supervision operation in the manufacturing stage of large mill.

Keywords  equipment manufacturing supervision; large mill; quality control

1   設備監造概述

設備監造是指監造單位按照設備供貨合同的要求，堅持客觀公正、誠信科學的原則，對工程項目所需設備在設計、采購、制造、安裝、調試、檢修、再制造等過程及其結果進行見證、檢驗、審核、控制等監督管理活動。（剩余4141字）