GB4943.1-2011和GB8898-2011與GB4943.1-2022對產品發熱要求解析

打開文本圖片集

摘要：發熱要求是產品安全評估的重要檢測項目，工作中溫度過高不僅造成設備運行卡頓、性能下降，甚至可能對操作人員的造成熱灼傷。文章通過對GB 4943.1-2011和GB 8898-2011與GB 4943.1-2022三個標準間發熱要求差異的比較，為實驗室檢測和制造商產品合規性提供一些參考。

關鍵詞：發熱要求差異；可觸及零部件；接觸溫度；接觸時間

doi：10.3969/J.ISSN.1672-7274.2023.07.049

中圖分類號：TN 98               文獻標志碼：A               文章編碼：1672-7274（2023）07-0-03

GB 4943.1-2011， GB 8898-2011 and GB 4943.1-2022 Analysis

of Product Heating Requirements

ZHANG Baixun1， YANG Ziyong1， LI Qiang2

（1. The State Radio_monitoring_center Testing Center， Beijing 100041， China; 2.Department Service Bureau of the Ministry of Industry and Information Technology， Beijing 100804， China）

Abstract： Heat requirement is an important test item in product safety evaluation. High temperature in work will not only cause equipment running delay and performance degradation， but also may cause thermal burns to operators. In this paper， the differences of heating requirements between GB 4943.1-2011 and GB 8898-2011 and GB 4943.1-2022 are compared to provide some references for laboratory testing and manufacturers' product compliance.

Key words： heating requirement difference; accessible parts; contact temperature; contact time

0   引言

隨著電子產品功能多樣性的跨界融合，視聽技術與信息技術的結合，產品界限也越來越模糊，很難清晰地將一個產品劃分到某個領域。（剩余3373字）