高純鉿中鐵含量的測定方法研究
打開文本圖片集
【摘要】本文通過實驗證實,稱樣量為1 g,稀釋10倍,以銠作內標元素,不進行基體分離,通過質量數選擇消除質譜干擾,采用稀釋法、內標法、標準加入法繪制校準曲線消除基體效應,可實現電感耦合等離子體質譜法對高純鉿中鐵含量的測定。
【關鍵詞】鐵含量;ICP-MS;碰撞池;標準加入法
【DOI編碼】10.3969/j.issn.1674-4977.2023.04.039
Study on the Determination Method of Iron Content in High Purity Hafnium
WANG Chunyan, LI Jiajia, FAN Bowen, ZHANG Qingming, YANG Yongming
(CNNC North Nuclear Fuel Element Co., Ltd., Baotou 014035, China)
Abstract: In this paper, it is confirmed by experiments that the sample weight is 1g, diluted 10 times, rhodium is used as the internal standard element, without matrix separation, mass spectrum interference is eliminated through Mass number selection, and matrix effect is eliminated by using dilution method, internal standard method, and standard addition method to draw calibration curve, which can realize the determination of iron content in high-purity hafnium by Inductively coupled plasma mass spectrometry.
Key words: iron content; ICP-MS; collision pool; standard addition method
鉿在核電軍工方面具有不可替代的作用[1],高純鉿中微量、痕量雜質元素對其使用性能有顯著影響[2],因此,對高純鉿的質量控制提出了越來越高的要求,建立準確可靠的高純鉿中雜質元素檢測具有重要意義。(剩余4420字)