中金1680m³ 高爐上料篩分工藝的應用和探討

打開文本圖片集

摘 要：高爐原燃料含粉率高對高爐冶煉影響大，造成高爐爐況波動，氣流分布混亂，不利于中心氣流形成。因此降低入爐的含粉量，使高爐爐況正常便于操作，是保證高爐穩定運行，順產高產的一項重要措施，從而達到降本增效，實現較大的經濟效益。

關鍵詞：高爐；生產；工藝；篩分；應用

APPLICATION AND DISCUSSION OF ZHONGJIN

1 680 m3 BLAST FURNACE

Xie Cong    Chen Jiexiang    Gan Xing    Zhang Langming    Liang Hui

（Guangxi Liugang Zhongjin Stainless Steel Co.， Ltd.    Yulin    537624，China）

Abstract：The high powder content of blast furnace raw fuel has a great influence on blast furnace smelting， resulting in the fluctuation of blast furnace condition and chaotic airflow distribution， which is not conducive to the formation of central air flow. Therefore， reducing the powder content into the furnace， making the blast furnace condition normal and easy to operate， is an important measure to ensure the stable operation of the blast furnace and high yield， so as to achieve cost reduction and efficiency， and achieve greater economic benefits.

Key words： blast furnace；manufacture；technics；screening；apply

1    概    述

目前中金1 680 m3高爐用于冶煉的原燃料主要有焦炭，燒結礦，塊礦。（剩余2337字）