H11Mo模具鋼電渣錠補縮工藝應用研究

打開文本圖片集

摘要：張宣科技特材研制公司新開發H11Mo模具鋼，但電渣錠頭部的渣溝與縮孔較深，自耗電極剩余多。有必要分析電渣重熔熱封頂階段自動控制補縮工藝的不足，提出適合、有效的補縮工藝控制新方式。經實踐驗證，生產問題得以解決，切損量減少，成材率提高。

關鍵詞：模具鋼；電渣錠；補縮工藝；熱封頂；渣溝；縮孔

中圖分類號：TF14 文獻標識碼：A 文章編號：1008-9500（2024）05-00-03

DOI：10.3969/j.issn.1008-9500.2024.05.018

Research on the Application of H11Mo Mold Steel Electroslag Ingot Shrinkage Process

JIN Hongwei

（Zhangxuan Technology Special Materials Company， Zhangjiakou 075100， China）

Abstract： Zhangxuan Technology Special Materials Company has newly developed H11Mo mold steel， but the slag groove and shrinkage hole at the head of the electroslag ingot are deeper， leaving more consumable electrodes. It is necessary to analyze the shortcomings of the automatic control shrinkage process during the hot capping stage of electroslag remelting， and propose a suitable and effective new method for shrinkage process control. Through practical verification， production problems have been solved， cutting loss has been reduced， and yield has been improved.

Keywords： mold steel; electroslag ingots; shrinkage process; hot capping; slag ditch; shrinkage hole

H11Mo模具鋼是空冷硬化型熱作模具鋼，具有高硬度和高韌性，滿足熱作模具鋼作業環境要求，因此在壓鑄行業廣泛應用。（剩余2833字）