基于有限元求解的輸電塔上下柱節點分析研究

打開文本圖片集

摘 要：采用ANSYS有限元分析軟件對該節點建立三維有限元模型，進行了靜力分析，以得到該類結構體系在靜力荷載作用下的受力性能。結果表明：支座底板下加勁肋下部的加強環能有效降低節點區的應力幅值，節點最大應力發生在加勁肋下部的加強環與下柱相交處，并滿足強度要求。

關鍵詞：輸電塔;節點;有限元;靜力分析

中圖分類號：TM75;TU391 文獻標識碼：A 文章編號：1001-5922（2022）05-0185-04

Analysis and research of transmission tower upper and lower column joints based on finite element solution

Abstract： In this paper， a three-dimensional finite element model of the joint is established by using ANSYS finite element analysis software， and the static analysis is carried out. The results show that the reinforcement ring at the lower part of the stiffener under the base plate of the support can effectively reduce the stress amplitude in the joint area the maximum stress of the joint occurs at the intersection of the stiffener ring and the lower column， which meets the strength requirements.

Key words： transmission tower;node;finite element;static analysis

國內外的變電站構架大多以型鋼為主材。（剩余2623字）